5-10 Installing the Operating System with Express SetupInstalling the Windows Server 2003Express Setup proceeds the setup by selecting or inputting several parameters on the wizard. Youcan also save the parameters to a floppy disk as a parameters file.1. Turn the power of peripheral device on, and then turn on the server.2. Insert the NEC EXPRESSBUILDER DVD into the optical disk drive of the server.3. Press the RESET switch or press Ctrl, Alt, and Delete to reboot from the NECEXPRESSBUILDER. (You may also turn off and then on again to reboot the server.)The system will boot from the DVD-ROM and NEC EXPRESSBUILDER starts.Select "OS installation *** default ***" from the boot selection menu. (If you do not hitany key, "OS installation" is selected automatically.)The Top menu will appear.4. Select [Perform the Express setup] from the Top Menu, click [Next].
