Configuring Your Server 4-7AdvancedOption Parameter Description Your SettingMemory Configuration – Displays Memory Configurationsubmenu.PCI Configuration – Displays PCI Configurationsubmenu.Peripheral Configuration – Displays Peripheral Configurationsubmenu.Advanced Chipset Control – Displays Advanced Chipset Controlsubmenu.Boot-time DiagnosticScreenEnabled[Disabled]When disabled, the BIOS will displaythe NEC logo during POST. PressEsc to switch to the POST executionscreen.Reset Configuration Data [No]YesSelect "Yes" if you want to clear thesystem configuration data during thenext boot. Automatically reset to"No" in the next boot.NumLock On[Off]Sets power on Numlock state.Memory/Processor Error [Boot]HaltIf "Halt" is selected, the boot isstopped when POST error occurs.[ ]: Factory-setIMPORTANT: Be sure to take a note of boot priority before selecting"Yes" for [Reset Configuration Data], because the information on bootdevice will be cleared. Select [Exit Saving Changes] to reboot thesystem, run BIOS SETUP utility, and provide settings for boot deviceorder again.
