6 Configuring Routing322 Voyager Reference GuideTCP MD5 Authentication ExampleConfiguring TCP MD5 Authentication on NokiaPlatform A1. Configure the interface as in “Configuring an Ethernet Interface.”2. Click the BGP link in the Routing Configuration section.The following two steps enable BGP function on Nokia Platform A.3. Enter 10.10.10.1 (default is the lowest IP address on the box) in theROUTER ID edit box.4. Enter 100 in the AS NUMBER edit box, then click APPLY.5. The following 2 steps configure the EBGP peer for Nokia Platform B.6. Enter 200 in the PEER AUTONOMOUS SYSTEM NUMBER edit box.7. Click EXTERNAL in the P EER GROUP TYPE drop-down window, thenclick APPLY.8. The following steps configure an EBGP peer with MD5 authentication9. Enter 10.10.10.2 in the A DD REMOTE PEER IP ADDRESS edit box; thenclick APPLY.10. Click the 10.10.10.2 link to access the BGP peer configuration page11. Select MD5 as the authentication type from the AUTHTYPE drop-downwindow; then click A PPLY.12. Enter the MD5 shared key (test123 for example) in the KEY edit box;then click APPLY.AS10000336NokiaPlatform AAS200NokiaPlatform B10.10.10.1/2410.10.10.2/24EBGP
