10 Configuring Security and Access596 Voyager Reference GuideCreating an IPsec PolicyChoosing IPv4 or IPv6 General Configuration Page1. Click C ONFIG on the home page.2. Access the appropriate IPsec General Configuration page.a. To display the IPv4 IPsec General Configuration page, click on theIPsec linkb. To display the IPv6 IPsec General Configuration page, first click onthe IPv6 Configuration link; this takes you to the main IPv6 page.Next, click on the IPsec link; this takes you to the IPv6 IPsec GeneralConfiguration Page.c. If you are on the IPv4 General Configuration page and wish to moveto the IPv6 General configuration page, scroll down to the bottom ofthe page and click the IPv6 IPsec General Configuration link.NoteApplication procedures are the same for both configuration page types.The primary difference is the format of the IP addresses. IPv4 uses dottedquad format and IPv6 uses canonical address format. There may bedifferences in selected range values; consult the inline Help option forspecifics.The following sections describe how to create an IPsec policy:
