Voyager Reference Guide 69! Adding a Proxy ARP Entry! Deleting a Static ARP Entry! Viewing Dynamic ARP Entries! Deleting Dynamic ARP Entries! Flushing All Dynamic ARP Entries! Configuring ARP for the ATM Interface! Changing Global Parameters! Adding a Static ATM ARP Entry! Deleting a Static ATM ARP Entry! Viewing and Deleting Dynamic ATM ARP EntriesEthernet InterfacesConfiguring an Ethernet Interface1. Click CONFIG on the home page.2. Click the Interfaces link.3. Click the physical interface link you want to configure in the PHYSICALcolumn.Example—eth-s2p14. Click the 10 MBIT/ SEC or the 100 M BIT / SEC radio button in thePHYSICAL CONFIGURATION table L INK SPEED field to select the linkspeed.NoteThis setting must be the same for all hosts on the network to which thedevice connects.
