3 Basic copy operations3-68 CS193/CS173/CS163The following procedures describe how to select Finishing settings.2 ReminderThe Staple settings are available only if the optional finisher is installed.The Punch settings are available only if the punch kit is installed on the optional finisher.Available Finishing SettingsCenter Staple/Fold Select this setting to fold copies. The copiescan also be bound with staples at the sametime.The "Center Staple & Fold" setting can beused if the saddle stitcher is installed on op-tional finisher.Output Tray Select the output tray where the finished copies are to be fed.Staple Select one of these settings to bind the cop-ies with a staple in the corner or with twostaples.Punch Holes are punched (4 holes) in the copies forfiling them.Setting DescriptionFinisher Finisher+ Punch kitFinisher+ Punch kit+ SaddlestitcherFinisher+ Punch kit+ MailbinSeparatorSort o o o o oGroup o o o o oOffset o o o o oStaple o o o o ePunch e o o o eCenter Staple & Fold e e o e eHalf-Fold e e o e eSelect Output Tray o o o o oo: Possiblee: Not possible
