CS193/CS173/CS163 12-45Utility mode 123 Touch [7 Expert Adjustment].The Expert Adjustment screen appears.4 Touch [2 Printer Adjustment].The Printer Adjustment screen appears.5 Touch [4 Centering (Duplex 2nd Side)].The Centering (Duplex 2nd Side) screen appears.6 Touch the button for the paper tray to be set.7 Press the [Start] key.A test pattern is printed.8 Check that the distance from the starting print position of thetest pattern to the edge of the paper (d) is 3 mm (±0.5 mm).– If the distance is 2.4 mm or less, touch [+] to increase theadjustment (between 0.2 mm and 3.0 mm).– If the distance is 3.6 mm or more, touch [-] to reduce theadjustment (between -0.2 mm and -3.0 mm).– If the distance is between 2.5 mm and 3.5 mm, continuewith step 10.– Each time [+] or [-] is touched, the value is increased ordecreased by one increment.9 Press the [Start] key.The adjusted test pattern is printed.10 Adjust the distance from the starting print position of the test pattern to the edge of the paper.– Check that the distance has been adjusted to between 2.5 mm and 3.5 mm.– If more adjustment is necessary, repeat steps 8 and 9.– To adjust the print position for a different paper tray, return to step 6.11 Touch [OK].– To cancel the setting and select the default, press the [Reset] key.The print position is adjusted.dd: 3.0 mm ± 0.5 mm
