8 Application functions8-76 CS193/CS173/CS163– To cancel the "Frame Erase" function, touch [No].? What happens when [Frame] is selected?% The same width is erased on all four sides of the original. The factory default setting is "Frame".? Can the settings be combined?% "Frame" cannot be combined with the other settings ("Top", "Left", "Right" or "Bottom").4 Touch [-], [+] or [None] to specify the width to be erased.– To specify a different width to be erased depending on the position, specify different settings for"Top", "Left", "Right", and "Bottom".– When using the keypad to specify the settings, press the [C] (clear) key to erase the value, and thentype in the setting.? What happens when a value outside of the allowable range is specified?% The message "Input error" appears. If "Input error" appears or if the erased width was incorrectlyentered, press the [C] (clear) key in the keypad, and then specify the correct value.5 Touch [OK].6 Specify any other desired copy settings.7 Using the keypad, type in the desired number of copies.8 Press the [Start] key.
