CS193/CS173/CS163 3-3Basic copy operations 33 Basic copy operations3.1 General copy operationThis section contains information on the general operation for making copies.The following procedure describes how to copy a single-sided original using basic copy operations.2 NoteThe maximum loading capacity of the output trays for the optional finisher may be limited dependingon the paper size and selected Finishing settings.With continuous printing (multiple jobs), the warning "The output tray has reached its capacity. Removepaper from the tray indicated by %." may appear, even if the paper was removed from the output trays.For details on multiple jobs, refer to "Multi-job feature" on page 11-3.Interrupting a print job resets the loading capacity of the output tray.For details on the limitations of the loading capacity for the output trays, refer to "Specifications" onpage 6-3.Some settings cannot be used together. For details on the settings that cannot be combined, refer to"Operations that cannot be combined" on page 3-6.1 Press the [Copy] key to display the Basic screen in Copy mode.2 Position the original to be copied.– For details on positioning the original, refer to page 3-8.
