12 Utility mode12-26 CS193/CS173/CS163* 1 Appears when finisher is installed with the saddle stitcher attached.* 2 Appears when finisher is installed with the punch kit attached.!DetailFor the procedure on adjusting the printer, refer to "Printer Adjustment" on page 12-41.For the procedure on adjusting the finisher, refer to "Finisher Adjustment" on page 12-46.For the procedure on adjusting the color registration, refer to "Color Registration Adjust" onpage 12-52.For the procedure on adjusting the gradation levels, refer to "Gradation Adjustment" on page 12-54.[Finisher Adjustment] appears only when an optional finisher is installed.Only "Black Image Density" is available for OHP transparencies.List/CounterGradationAdjustmentImage Stabiliza-tion OnlyWhen adjusting the gradation levels, first pressthe [Start] key to perform image stabilization.-Copy Adjust the gradation levels if there are changes inthe color gradations of the print image. The ad-justment is made with stress on increasing thenumber of images stored in the memory.-Printer (Gradation) Adjust the gradation levels if there are changes inthe color gradations of the print image. The ad-justment is made with stress on the gradations inimages.-Printer (Resolu-tion)Adjust the gradation levels if there are changes inthe color gradations of the print image. The ad-justment is made with stress on the reproducibilityof text and lines.-Line Detec-tionPrior DetectionSettingSelect whether or not a warning appears when the left partition glass is dirty,and specify the dirt detection level. The dirt detection operation is performedbefore and after scanning an original using the ADF.Detection WhileFeeding SettingSpecify the level at which dirt is detected when scanning an original using theADF. If "Do Not Remove" is selected, the operation to remove lines is not per-formed.Parameter Description Default SettingParameter DescriptionManagement List Job Settings List The machine settings can be printed.Paper Size/Type Counter Store combinations of paper sizes and paper types to becounted.
