2 Before making copies2-4 CS193/CS173/CS1632 ReminderTo keep the features and quality of the machine, use the paper feed cabinet to place the machine onthe floor.8 Mount kit MK-713 Used for banner printing.9 Image controller IC-409 The external image controller connecting to CS193/CS173.Allows this machine to be used as a color printer configured into a computernetwork. For details, refer to the corresponding user manual.To install the image controller, any of the LCT, single paper feed cabinet, ordouble paper feed cabinet must be installed to the machine.10 Paper feed cabinet PC-104 The top tray can be loaded with up to 500 sheets of paper, and the bottom traycan be used as storage.Referred to as the "single paper feed cabinet" throughout the manual.11 Paper feed cabinet PC-204 Both the top and bottom trays can each be loaded with up to 500 sheets ofpaper.Referred to as the "double paper feed cabinet" throughout the manual.12 Paper feed cabinet PC-405 Can be loaded with up to 2,500 sheets of paperReferred to as the "LCT" throughout the manual.13 Finisher FS-519 Feeds out finished printed pages. The "Sort" setting (separating by copy set),"Group" setting (separating by pages), and Staple settings ("Corner" and "2position") are available.To install the finisher, any of the LCT, single paper feed cabinet, or double pa-per feed cabinet must be installed to the machine.14 Output tray OT-602 Installed onto finisher to divide printed pages.Referred to as the "output tray" throughout the manual.15 Mailbin kit MT-502 Installed onto finisher to divide printed pages (only with computer printing) andfeed them into the appropriate tray assigned to a specific individual or group.Collects printed pages.Referred to as the "mailbin kit" throughout the manual.16 Saddle stitcher SD-505 Installed onto finisher so that copies can be bound or folded at the center.Referred to as the "saddle stitcher" throughout the manual.17 Punch kit PK-515 Installed onto finisher to allow hole punching to be used.18 Job separator JS-505 Installed onto the output tray to divide printed pages.Referred to as the "separator" throughout the manual.19 Local interface kit EK-603*¹ Used for connecting the authentication unit (biometric type), the authenticationunit (IC card type), the JScribe IC card reader/writer and external memory(USB memory).20 Fax kit FK-502* 1 Allows this machine to be used as a fax machine.21 Scan accelerator kitSA-501*1 Creates images at high speed when sending scans.22 Fax multi line ML-501 Installed to increase the telephone lines available for faxing.23 Video interface kit VI-504*2 Used for connecting the image controller to the CS193/CS173.24 Stamp unit SP-501* 2 Applies a stamp to originals that have been scanned.For details, refer to the User manual – Network scan/Fax/Network Fax Opera-tions.25 Security kit SC-503*1 Installed to encode the data saved on the hard disk so that the hard disk canbe used more safely.*1 Parts marked with an asterisk are to be installed to the mount kit, and therefore are not shown in the illustration.*2 Parts marked with an asterisk are internal options and therefore are not shown in the illustration.No. Part name Description
