2 Before making copies2-46 CS193/CS173/CS1634 Load the paper into the left side of the LCT so that the side ofthe paper to be printed on (the side facing up when thepackage was unwrapped) faces up.5 Close the LCT.– If special paper is loaded, the paper type setting must be specified. For details, refer to "Specifyinga setting for special paper" on page 7-17.2 ReminderBe careful not to touch the film.Do not load so many sheets of paper that the top of the stack is higher than the , mark.For details on the paper that can be loaded into the LCT, refer to "Copy paper" on page 7-3.2 NoteIf the machine has entered Low Power mode or Sleep mode, the LCT cannot be pulled out, even afterthe tray release button is pressed. Be sure to first cancel Low Power mode or Sleep mode., mark
