CS193/CS173/CS163 12-27Utility mode 12Reset Settings2 ReminderEven if the System Auto Reset Time is [OFF], the System Auto Reset function is activated after 1 minuteof no operation of the machine during the User Authentication or Account Track.However, when in theEnlarge Display mode, the System Auto Reset function is not activated.If user authentication settings have been specified or "Enhanced Security Mode" has been set to "ON",the logoff from Administrator mode or user authentication mode will be performed according to the"System Auto Reset Time" parameter.Parameter Description Default SettingSystem Auto Reset Specify the desired length of time until the auto-matic system reset operation is performed.• Priority Mode:Select the setting ("Copy" or "Scan/Fax") forthe mode that the machine enters when theautomatic system reset operation is per-formed.• System Auto Reset Time:Specify the setting (between 1 and 9 minutesor "OFF") for the desired length of time untilthe automatic system reset operation is per-formed.Priority Mode:CopySystem Auto ResetTime: 1 MinuteAuto Reset Select the setting (between 1 and 9 minutes or"OFF") for the desired length of time until the au-tomatic panel reset operation is performed foreach mode (Copy and Scan/Fax).Copy: 1 MinuteScan/Fax: 1 MinuteJob Reset When Account ischangedSelect whether or not the settings are reset (initial-ized) when the user has changed.This machine detects that the user has changedwhen the optional key counter has been removedor when the user has logged off if user authentica-tion or account track settings are specified.ResetWhen originalis set on ADFSelect whether or not the settings are reset whenan original is loaded into the automatic documentfeeder.Do Not ResetNext Job Staple Setting:Select whether the same Staple setting from theprevious job is set or the setting is canceled whenthat job begins and the settings for the next jobcan be specified.OFFOriginal Set/Bind Direction:Select whether the same Original Direction andBinding Position settings from the previous jobare set or the settings are canceled when that jobbegins and the settings for the next job can bespecified.OFFReset Data After Job:Select whether the same settings for a scan oper-ation or for a fax transmission from the previousjob are set or the settings are canceled when thatjob is completed and the settings for the next jobcan be specified. (However, even if "OFF" is se-lected, the destination is cleared.)ON
