CS193/CS173/CS163 12-19Utility mode 12Auto Sort/Group Selection Select whether or not the "Sort" setting is automatically se-lected when 2 or more copies are set to be printed in a sin-gle job.• Yes:When an original is loaded into the automatic docu-ment feeder and the [Start] key is pressed, the "Group"setting is automatically selected if the original consistsof only one page, and the "Sort" setting is automatical-ly selected if the original consists of two or more pages.• No:The "Sort" or "Group" setting is not selected automat-ically.YesDefault Copy Settings Specify the default settings for Copy mode.The copy settings selected when the machine is turned on(the power switch is set to n ) or the [Reset] key is pressedcan be specified.• Current Setting:The settings specified from the touch panel before Util-ity mode was entered are set as the default settings forCopy mode.• Factory Default:The factory default settings are set as the default set-tings for Copy mode.Factory DefaultWhen AMS Direction is In-correctSelect whether or not printing continues when the paperand original orientations are different with the "Auto PaperSelect" setting selected.• Print:The Zoom setting is automatically set and the copy isprinted on paper of the specified size in the specifiedorientation.• Delete Job:The job is deleted, and no copies are printed.PrintSeparate Scan OutputMethodSelect whether copies are printed as the original is beingscanned or after the entire original has been scanned whenscanning an original in separate batches or when scanninga multiple-page original from the original glass.• Page Print:Printing of copies that can be printed begins while theoriginal is being scanned.• Batch PrintPrinting begins after all pages of the original have beenscanned.Page PrintEnlargement Rotation Select whether an image that exceeds 297 mm in the mainscanning direction (left/right direction on the original glassand ADF) is rotated when the copies are printed.• Allow:An enlargement rotation is performed. However, this isapplied only when the "Black" Color setting is selected.• Restrict:The enlargement rotation is prohibited, regardless ofthe selected Color setting.RestrictAuto Zoom (Platen) Select whether or not the "Auto" Zoom setting is automat-ically selected when a paper tray is selected (except whenthe "Auto" Paper setting is selected) while an original isplaced on the original glass.OFFAuto Zoom (ADF) Select whether or not the "Auto" Zoom setting is automat-ically selected when a paper tray is selected (except whenthe "Auto" Paper setting is selected) while an original isloaded into the ADF.ONSpecify Default Tray whenAPS OffSelect which paper tray is selected when the "Auto" Papersetting is canceled.• Tray Before APS ON:The paper tray that was being used before the "Auto"Paper setting was selected is selected.• Default Tray:Tray 1 is used.Tray Before APS ONSelect Tray for Insert Sheet Select the default paper tray loaded with paper for the cov-er pages (front cover), inserted pages and chapter title pag-es.Tray 2Parameter Description Default Setting
