VarioLink 6022/7522 x-9Available featuresAutomatically selecting the paperThe most appropriate paper size can automatically be selected based on the size of the loaded original andthe specified zoom ratio.For details, refer to "Automatically selecting the paper size ("Auto" Paper setting)" on page 2-30.Adjusting copies to the size of the paperThe most appropriate zoom ratio can automatically be selected based on the size of the loaded original andthe specified paper size.For details, refer to "Automatically selecting the zoom ratio ("Auto" Zoom Setting)" on page 2-32.Specifying separate horizontal and vertical zoom ratiosBy specifying separate horizontal and vertical zoom ratios, copies of the original can be resized as desired.For details, refer to "Typing in separate X and Y zoom ratios (Individual Zoom settings)" on page 2-37.Scanning the original in separate batchesAn original with a large number of pages can be divided and scanned in separate batches. Double-sidedcopies can be produced by using the original glass or the original pages can be alternately loaded onto theoriginal glass or into the ADF, and then all pages can be copied together as a single job.For details, refer to "Scanning the original in separate batches ("Separate Scan" setting)" on page 2-8and "Scanning a multi-page original from the original glass" on page 2-11.Carrying out half-fold/center staple & fold/tri-fold/Z-fold finishing processCopies can be folded at their center ("Half-Fold" setting) or bound with staples after being folded in half("Center Staple & Fold" setting). In addition, the copies can be folded in three ("Tri-fold" setting) or Z-folded("Z-fold" setting).For details, refer to "Selecting a folding setting" on page 2-65.Sorting copiesThe finishing method for copies can be selected.For details, refer to "Separating copies by sets ("Sort" setting)" on page 2-56, "Separating copies bypages ("Group" Setting)" on page 2-56.ABC ABC ABCHalf-Fold Center Staple & FoldTri-Fold Z-FoldABCABC ABC
