VarioLink 6022/7522 4-47Troubleshooting 44.4 Main messages and their remediesMessage Cause RemedyOriginals left on original glass. The original was left on the originalglass.Remove the original from the originalglass.Paper of matching size is not availa-ble.Select the paper size.Paper of a suitable size is not loadedin a paper tray.Either select paper of a different sizeor load paper of a suitable size.Load paper into the bypass tray. Paper of a suitable size is not loadedin the bypass tray.Load paper of the appropriate sizeinto the bypass tray.The original size cannot be detect-ed.Select the paper size.1: The original is not positioned cor-rectly.2: An original with a non-standardsize or with a size too small to be de-tected is loaded.1: Position the original correctly.2: Select the correct paper size.The image will not fit on selected pa-per.Change the direction of the original.The image does not fit in the paper. Load the original turned 90 degrees.Cannot be set with XXX. Functions that cannot be used to-gether are selected.Make copies using only one of thefunctions.The output tray has reached its ca-pacity.Remove all paper from the tray indi-cated by →.Since the maximum amount of cop-ies for the indicated finisher outputtray has been exceeded, the machineis unable to make copies.Remove all paper from the indicatedtray.Enter User Name and password,and then touch [Login] or press the[Access] key.User authentication settings havebeen specified. Copies cannot bemade unless a user name and its cor-rect password are entered.Type in your user name and pass-word. (See p. 1-35.)Enter Account Name and password,and then touch [Login] or press the[Access] key.Account track settings have beenspecified. Copies cannot be madeunless an account name and its cor-rect password are entered.Type in your user name and pass-word. (See p. 1-38.)Your account has reached its maxi-mum allowance.The limit on the number of pages thatcan be printed has been reached.Contact the administrator of the ma-chine.The part indicated by → is open.Ensure that it is properly closed.Since a machine door or cover isopen or an option is not installed cor-rectly, the machine is unable to makecopies.Make sure that all doors and coversare closed and that all options are in-stalled correctly.Install toner cartridge, and close alldoors.The toner cartridge is not installedcorrectly.Reinstall the supplies or parts, orcontact your service representative.Replenish paper. The indicated tray has run out of pa-per.Load paper into the indicated tray.(See p. 1-47, p. 1-48, and p. 1-53.)No more staples.Replace the staple cartridge, or can-cel stapling.The staples have run out. Replace the staple cartridge.(See p. 8-6.)Misfeed detected. Since a paper misfeed occurred, themachine is unable to make copies.Clear the paper misfeed. (See p. 4-4.)Reinsert the following # of originals. After clearing a paper misfeed, it isnecessary to reload certain pages ofthe original that have already beenfed through the ADF.Load the indicated original pages intothe ADF.An internal error occurred. Openand then close the front door. If thetrouble code appears again contactyour Service Rep.The machine malfunctioned and isunable to make copies.Clear the error by following the on-screen instructions. If the error can-not be cleared or released, contactyour service representative with theerror code displayed on the screen.Malfunction detected.Please call your Service Rep.The machine malfunctioned and isunable to make copies.Inform your service representative ofthe code displayed on the touch pan-el.Now Downloading Program Datafrom Firmware server.1: CS Remote Care was activated bythe service representative.2: Internet ISW is being downloaded.Do not turn off the machine with the[Power] (auxiliary power) key whilethis message is displayed.After turning off the machine with the[Power] (auxiliary power) key, turn offthe main power switch, and then con-tact the service representative.
