VarioLink 6022/7522 11-15Utility mode 1111.3 Specifying user settingsThis section describes the function and main registration parameters that can be specified after pressing the[Utility/Counter] key, then touching [User Settings].11.3.1 System SettingsLanguage SelectionMeasurement Unit SettingsPaper Tray Settings* Appears when the optional Large Capacity Unit LU-405/406 is installed.Power Save SettingsDescription Default SettingSelect the language of the touch panel message. EnglishDescription Default SettingSelect one of the following as the measurement units in which values are displayed inthe touch panel.mm (Numerical Value), inch (Numerical Value), inch (Fraction)inch (Fraction)Parameter Description Default SettingAuto Tray SelectionSettingsSelect the paper trays that are selected automatically whenthe "Auto" Paper setting is specified. In addition, specify thepriority of the paper trays when the auto tray switch operationis performed.Tray priority order: Tray 1→ Tray 2 → Tray 3 → Tray4 → Bypass → LCT *Auto Tray SwitchON/OFFSelect whether or not a paper tray loaded with paper of thesame size is selected automatically when a paper tray thatwas selected manually becomes empty while printing copies.RestrictNo Matching Paper inTray SettingSelect the operation that is performed when there is no paperof the corresponding size in the specified paper tray.• Stop Printing (Tray Fixed):The machine stops operating.• Switch Trays (Tray Priority):When the corresponding size or type of paper is not load-ed in the specified paper tray, a different paper tray is se-lected if it contains paper of the corresponding size.Stop Printing (Tray Fixed)Print Lists Select the paper tray used for printing lists, such as the salescounter and consumables indicators.Tray 1, 1-SidedPaper Type/Size Set-tingsSpecify the paper type to be use for each tray. Plain PaperPost Inserter Alert Dis-play SettingSpecify whether to display the paper size and paper orienta-tion during the tray display or an alarm indication for the postinserter.YesParameter Description Default SettingLow Power Mode Settings Specify the desired length of time (between 1 and 240 min-utes) until the machine enters Power Save mode.15 minutesSleep Mode Settings Specify the desired length of time (between 1 and 240 min-utes) until the machine enters Sleep mode.60 minutes
