VarioLink 6022/7522 2-52Basic copy operations 22.10 Selecting the Density settingsSpecify the copy density and background density. Adjust to the best density according to the status of theoriginals.The following two density adjustments are available.The following procedures describe how to specify the density settings.2.10.1 Adjusting the print density (Density settings)1 In the Basic screen, touch [Density/Background].The Density/Background Removal screen appears.2 Select the desired Density setting.– Each time [Light] or [Dark] is touched, the density is lightened or darkened by one level.– To select the center setting (default setting), touch [Standard].– Touch [Auto] to automatically adjust the density level according to the original being copied.– To cancel the setting and select the default, press the [Reset] key.3 Touch [OK].Function DescriptionDensity The print image density can be adjusted to one of nine levels.Each time [Lighter] or [Darker] is touched, the density is lightened or darkened by onelevel.Touch [Standard] to select the middle setting of the nine levels.Touch [Auto] to automatically adjust the density level according to the original beingcopied.Background Removal The density of the background color of the original can be adjusted to one of ninelevels.Each time [Light] or [Dark] is touched, the background density is lightened or dark-ened by one level.Touch [Standard] to select the middle setting of the nine levels.
