VarioLink 6022/7522 3-19Additional copy operations 3The Touch Panel Adjustment screen appears.? Why does the machine not respond when [TouchPanel Adjustment.] is touched?The touch sensors are not aligned on the touch panel.% Press the [1] key in the keypad.3 Touch the four check points [+], making sure that a sound is produced with each.– The check points [+] can be touched in any order.– To reset the adjustment, press the [C] (clear) key, and then touch the four check points [+].If the check points have been touched correctly, the indicator on the [Start] key lights up in blue.4 Press the [Start] key.The touch panel is adjusted, and the Accessibility Setting screen appears again.5 Touch [Close] or press the [Accessibility] key.The Basic screen appears again.2 NoteIf the touch panel cannot be adjusted, contact the service representative.!DetailTo cancel the touch panel adjustment, press the [Stop] key or the [Reset] key.3.7.3 Setting the Key Repeat Start/Interval Time functionsThe length of time until the value begins to change after a touch panel button is held down and the length oftime for the value to change to the next number can be specified.0 The settings specified for the Key Repeat Start/Interval Time functions are only applied in the EnlargeDisplay mode.1 Display the Accessibility Setting screen.– For details on displaying the Accessibility Setting screen, refer to "Displaying the AccessibilitySetting screen" on page 3-18.
