VarioLink 6022/7522 3-24Additional copy operations 33 Touch the button for the desired display time.– To not display the message requesting confirmation to reset the settings, touch [No].– To display the message requesting confirmation to reset the settings, touch the button ([30 second],[60 second], [90 second] or [120 second]) for the length of time that the message is to be displayed.– To cancel changes to the settings, press the [Reset] key. All changes to the settings are canceled.4 Touch [OK].The Accessibility Setting screen appears again.5 Touch [Close] or press the [Accessibility] key.The Basic screen appears again.2 NoteThe Enlarge Display mode is compatible with basic copy, scanning and fax functions. With the EnlargeDisplay mode, text and illustrations are displayed at a larger size so that they can be seen more easily.For details on the Enlarge Display mode, refer to the User’s Guide [Enlarge Display Operations].If the time setting is the same for the automatic panel reset operation and the automatic system resetoperation, the display of the message requesting confirmation to exit Enlarge Display mode is givenpriority and the message requesting confirmation to reset the settings in Enlarge Display mode is notdisplayed.3.7.6 Setting the "Enlarge Display Mode Confirmation" functionWhen the [Enlarge Display] key is pressed to change the display of the screen, a message can be displayed,requesting confirmation to cancel the settings that cannot be specified in Enlarge Display mode.As the factory default, "OFF" is selected.Yes: The settings that cannot be displayed are cancelled, and the Enlarge Display mode is entered.No: The Enlarge Display mode is not entered.
