VarioLink 6022/7522 2-56Basic copy operations 22.11.1 Separating copies by sets ("Sort" setting)0 As the factory default, "Group" is selected.0 If offset sorting is selected while no finisher is installed, printed copies will be fed out and sorted in analternating w and v pattern if the following conditions are met.8-1/2 × 11- or 5-1/2 × 8-1/2-size paper is used.Paper of the same size and type is loaded with the w orientation in one paper tray and with the vorientation in another tray.The "Auto" Paper setting is selected.The "Auto" Paper setting is not selected when the "Mixed Original" setting is selected.0 If offset sorting is selected while a finisher is installed, printed copies are fed out and stacked on top ofeach other with each set shifted to separate it.1 In the Basic screen, touch [Finishing].The Finishing screen appears.2 Touch [Sort].– To separate each set of copies, touch [Yes] under "Offset".3 Touch [OK].The Basic screen appears again.2.11.2 Separating copies by pages ("Group" Setting)0 As the factory default, "Group" is selected.0 If offset sorting is selected while no finisher is installed, printed copies will be fed out and sorted in analternating w and v pattern if the following conditions are met.8-1/2 × 11- or 5-1/2 × 8-1/2-size paper is used.Paper of the same size and type is loaded with the w orientation in one paper tray and with the vorientation in another tray.The "Auto" Paper setting is selected.The "Auto" Paper setting is not selected when the "Mixed Original" setting is selected.
