VarioLink 6022/7522 2-7Basic copy operations 22.3.2 Placing the original on the original glass0 For details on the types of originals that can be placed on the original glass, refer to "Originals" onpage 6-29.0 When placing the original on the original glass, be sure to lift open the ADF at least 20°.If the original is placed on the original glass without the ADF being lifted at least 20°, the correct originalsize may not be detected.0 Do not place objects weighing more than 15 lb on the original glass. In addition, do not press downextremely hard on a book spread on the original glass, otherwise the original glass may be damaged.0 For thick books or large objects, make the copy without closing the ADF. When an original is beingscanned with the ADF open, do not look directly at the light that may shine through the original glass.Although the light that shines through the original glass is bright, it is not a laser beam and, therefore,is not as dangerous.1 Lift open the ADF or the original cover.2 Place the original face down on the original glass.– Load the original pages so that the top of the original is toward the back or the left side of themachine.3 Align the original with the mark in the back-left corner of the original scales.– For details on selecting the original orientation, refer to "Selecting the original orientation(Original Direction settings)" on page 2-22.– For details on specifying the binding margin position,refer to "Selecting the position of the bindingmargin ("Binding Position" settings)" onpage 2-24.Original scales
