VarioLink 6022/7522 2-11Basic copy operations 2– If the "Separate Scan Output Method" parameter is set to "Batch Print", the copy settings can bechanged. To change the copy settings, touch [Change Setting], and then touch [OK] after changingthe settings as desired.2.3.4 Scanning a multi-page original from the original glassWhen making double-sided or combined copies using the original glass, place each page of a multi-pageoriginal on the original glass to scan it. The following procedure describes how to place single-sided originalpages on the original glass to make double-sided copies.0 The output method used with the "Separate Scan" setting can be set to "Page Print" or "Batch Print".As a default, "Page Print" is selected.0 For details on the output method used with the "Separate Scan" setting, refer to "Copier Settings" onpage 11-18.1 Lift open the ADF.2 Position the first page or the first side of the original face down onto the original glass.– For details on positioning the original, refer to "Placing the original on the original glass" onpage 2-7.3 Close the ADF.
