VarioLink 6022/7522 7-2Application functions 77 Application functions7.1 Inserting paper between OHP transparencies ("OHP Interleave"function)In order to prevent copies printed onto OHP transparencies from sticking together as a result of the heat thatis produced during copying, paper (interleaves) can be inserted between the transparencies.The interleaf can be kept blank, or copied from the same original as the transparency.0 No Finishing setting can be used.1 Position the original to be copied.– For details on positioning the original, refer to "Feeding the original" on page 2-6.– For details on loading OHP transparencies, refer to "Paper Weight" on page 6-2 and "Loadingpaper into the bypass tray" on page 1-53.2 Load the OHP transparencies into the bypass tray, and load the interleaf paper into the desired papertray.– Use interleaf paper with the same size as the OHP transparencies.3 Select [Transparency] as the paper type for the bypass tray, and then touch [OK].– For details on specifying the paper type settings, refer to "Specifying a paper type for bypasstray" on page 6-18.4 Touch [Application], and then touch [Sheet/Cover/Chapter Insert].
