VarioLink 6022/7522 11-71Utility mode 1111.9.6 Viewing user counters1 Display the Administrator Settings screen.– For details on displaying the Administrator Settings screen, refer to "Displaying the AdministratorSettings screen" on page 11-36.2 Touch [4 User Authentication/Account Track].The User Authentication/Account Track screen appears.3 Touch [2 User Authentication Settings].The User Authentication Setting screen appears.? Why is [2 User Authentication Settings] not available?% [2 User Authentication Settings] is not available if "User Authentication" on the General Settingsscreen is set to "OFF".4 Touch [3 User Counter].5 Touch the button for the desired user, and then touch [Counter Details].The Counter Details screen for the user appears.6 Touch the button for the counter to be viewed, and then check the counter.– To clear the counters for the current user, touch [Clear Counter] in the Counter Details screen forthe current user. A confirmation message appears, asking whether the counter should be cleared.To clear the counters for the displayed user, touch [Yes] in the confirmation message screen, andthen touch [OK]. The maximum number allowed is not cleared.– To clear the counters for all users, touch [Reset All Counters] in the User Counter screen. Aconfirmation message appears, asking whether the counters should be cleared. To clear thecounters for all users, touch [Yes] in the confirmation message screen, and then touch [OK]. Themaximum number allowed is not cleared.7 Touch [Close].
