VarioLink 6022/7522 1-30Before Making Copies 12 NoteA job can also be queued while the machine is warming up after the [Power] (auxiliary power) key isturned on. For details, refer to "Scanning during warm-up" on page 1-30.After the machine has finished warming up, the scanned image will be printed.Refer to "Main unit" on page 5-2 for warm up time.1.3.2 Scanning during warm-up1 Press the [Power] (auxiliary power) key.– For details on turning on the machine, refer to "Turning off the machine" on page 1-31.The indicator on the [Start] key lights up in orange.After the warm-up message is displayed, the Basic screen appears. The indicator on the [Start] keylights up in blue.2 Check that the message "Warming up. Ready to scan." appears on the touch panel.3 Position the original to be copied.– For details on positioning the original, refer to "Feeding the original" on page 2-6.4 Specify any other desired copy settings.5 Using the keypad, specify the desired number of copies.– For details on specifying the number of copies, refer to "General copy operation" on page 2-2.6 Press the [Start] key.The original is scanned, and the job is added to the list of queued jobs.– If the "Copy Operating Screen" parameter in Utility mode was set to "Yes", touch [Next Copy Job]to display the Basic screen.– After the machine has finished warming up, the jobs will automatically be printed.
