VarioLink 6022/7522 11-23Utility mode 1111.4 Specifying administrator settingsThis section describes the function and main registration parameters that can be specified after pressing the[Utility/Counter] key, then touching [Administrator Settings].11.4.1 System SettingsPower Save SettingsOutput SettingsDate/Time SettingsDaylight Saving TimeParameter Description Default SettingLow Power Mode Set-tingsSpecify the desired length of time (between 1 and 240 min-utes) until the machine enters Power Save mode.15 minutesSleep Mode Settings Specify the desired length of time (between 1 and 240 min-utes) until the machine enters Sleep mode.60 minutesPower Save Key Select which low power mode is entered when the [PowerSave] key is pressed.• Low Power:The touch panel goes off and the machine enters a modewhere it conserves energy.• Sleep:Although the machine conserves more energy in Sleepmode than in Power Save mode, the machine must warmup when Sleep mode is canceled, therefore taking morepreparation time than Power Save mode.Low PowerEnter Power SaveModeSpecify settings for faxing. For details, refer to the User’sGuide [Network Scan/Fax/Network Fax Operations].NormalParameter Description Default SettingPrint/Fax OutputSettingSpecify settings for faxing and printing. For details, refer to the Us-er’s Guide [Network Scan/Fax/Network Fax Operations] and the Us-er’s Guide [Print Operations].Output Tray Set-tingsSelect the finishing tray for each type of job (copies, printouts, re-ports and faxes).Copy: Tray 1Printer: Tray 1Print Reports: Tray 2Fax: Tray 2Shift Output EachJobSelect whether or not printed copies are fed out shifted when "Off-set" is selected while a finisher is installed.• Yes: Pages are fed out shifted.• No: Pages are fed out without being shifted.YesDescription Default SettingSpecify the current date and time. In addition, the time zone can be set between -12:00and 13:00 (in 30-minute increments).Time Zone: +00:00Description Default SettingSelect whether or not the machine’s internal clock observes daylight saving time. If"Yes" is selected, a setting appears so that the length of time for adjusting the currenttime can be set. The length of time applied for daylight saving time can be set between1 and 150 minutes in 1-minute increments.No
