- 198 -5. Fax[TTI] is enabled by factory default, resulting in the name that you specify with [Sender ID]printed on faxes as [Standard TTI]. To use any sender name (originator) other than [StandardTTI], follow the procedure below.1 Press [Fax/Internet Fax] or the (FAX) button.2 Set a document in the ADF or on the document glass.3 Press [Fax].4 Press [Communicating Function] on the [Advanced] tab.5 Press [TTI Select].To select an originator, you must register the sender name (originator) in advance.Registering the Sender Name (Originator)6 Select an originator name.7 Specify a destination.Entering Fax Number to Send a Fax (User's Manual)Specifying a Destination from Phone BookSpecifying a Destination Using One-touch ButtonSpecifying a Destination from Transmission History and Reception History8 Change other settings if necessary, and then press the (START) button.Disclosing a Sender Name (Originator) to the RecipientYou can change other settings for fax transmissions.Setting Scanning for TransmissionEntering Fax Number to Send a Fax (User's Manual)Set whether to automatically print transmission results.To change the default value, change it from [Admin Setup] > [Fax Setup] > [Default Settings] > [Transmit Conf. Report].1 Press [Fax/Internet Fax] or the (FAX) button.2 Set a document in the ADF or on the document glass.3 Press [Fax].4 Press [Communicating Function] on the [Advanced] tab.5 Press [Transmit Confirmation].[Transmit Conf. Report] is set to [ON].Pressing [Transmit Conf. Report] switches between [ON] and [OFF].Changing the Sender Name That is Printed on Faxes Printing Transmission Results Automatically (Transmit Conf.Report)
