- 55 -2. CopyColor SettingsThis section describes color settings when copying.• Switching Color Modes• Adjusting the Contrast (Contrast)• Adjusting Hue for Color Copy• Adjusting Saturation• Adjusting RGBSwitches the Color Modes. You can use the following three color modes.• Color: All documents are copied in full color.• Mono: All documents are copied in black and white.• Auto: This machine detects the color of each page automatically. (Default)Color documents are copied in full color, black and white documents arecopied in black and white. Copying becomes slow.• When [Auto] is selected, printout's colors may not look as you expected in the following cases. In such a case, set[Color] or [Mono].Here are some examples.- Documents with extremely small colored part- Dark-colored documents- Pale documents- Yellowish documents- Documents with colored backgroundYou can change the criteria for determining color document and black and white document from [Device Settings] >[Admin Setup] > [Scanner Setup] > [Scanner Adjust] > [Auto Color Judge Level] on the touch panel.Scanner Setup1 Press [Copy] or the (COPY) button.2 Set a document in the ADF or on the document glass.3 Press [Color Mode] on the [Basic] or [Image Settings] tab.Switching Color Modes
