- 75 -3. Scan• There are three methods to display preview images.– : Displays full page.– : Displays across the width of the screen.– : Displays the scanned page at the same magnification.• Press [Full Screen] to display the preview image in full screen.• Use , , , and to scroll the preview image.• When scanning multiple pages of documents, use the navigation button to switch between the pages.– : Displays the previous page.– : Displays the next page.– : Displays any page. Press this button and enter page number you want to display.• If you set the next document on the ADF or document glass and press [Preview], the machine scans thedocument and displays the scanned document.• Press [Cancel Preview] to close the preview screen and cancel sending.7 Press [Start Transmission].This section describes how to read documents for the scan function.Scanning Multiple Documents Continuously (Continuous Scan)To scan multiple documents as a single job, enable Continuous Scan mode.In Continuous Scan mode, you can scan your documents from the ADF, document glass, orboth of them.1 Press [Scan] or the (SCAN) button.2 Set the first sheet of a document in the ADF or on the document glass.3 Select a scan function.Sending Scanned Data as an E-mail AttachmentSaving Scanned Data in USB MemorySaving Scanned Data in a Shared Folder4 Press [Continuous Scan] on the [Advanced] tab to set it to [ON].Pressing [Continuous Scan] switches between [ON] and [OFF].5 Change other settings if necessary, and then press the (START) button.Other Settings to Scan
