- 328 -9. Operating Management/ SpecificationsForwardingSettingForwarding Setting OFF Sets whether to enable the fax forwardingmode.Forwarding Number (NULL) Sets a fax number used for the faxforwarding mode.TAD Mode Type 3 Sets an operation type in Tel / Fax Readymode.[Type 3]: A fax signal is detected in15 seconds from when the answeringmachine answers. Normally, use this type.[Type 1]: A fax signal is detected right afterthe answering machine answers, and thenthe reception starts. If you have any faxreception problems, they may be improved ifthis type is set.[Type 2]: A fax signal is detected right afterthe answering machine answers. Set thistype if you usually use this machine as aphone.Tel Priority Mode OFF Sets when the external telephone and themachine ring in Tel / Fax Ready mode.[ON]: The sender is assumed to make avoice call. The telephone rings early.CNG Detection OFF Sets whether to determine whether thesender is sending a fax during the off thehook condition in Tel / Fax Ready mode.T/F Timer Programming 35 seconds Sets when to start the auto fax reception ifthe communication does not start even afteran incoming call arrives in Tel / Fax Readymode or Ans / Fax Ready mode.Soft Ringer Volume High Sets a phone ring volume in Tel / Fax Readymode.Remote Receive Number OFF Sets a remote switch over number.Item FactorydefaultsettingDescription FaxServer FunctionItem Factory default setting DescriptionEnvironmental Settings FaxServer Function OFF Sets whether to usescanning to fax server.Prefix (NULL) Sets to prefix code forscanning to fax server.Suffix @faxserver Sets to suffix code forscanning to fax server.Text OFF Sets whether to add bodytext.Default Settings Scan Size A4 or Letter Sets the default scan size.Density 0 Sets the default density.Resolution Normal Sets the default resolution.Background Removal Auto Sets the default setting ofthe background removal.Continuous Scan OFF Sets whether to useContinuous Scan mode bydefault.Preview OFF Sets the preview image ofsending image.Compression Rate Low Selects the defaultcompression level.Configure Shortcuts 01: Manual Dial02: Speed Dial03: Group List04: Tx History05: Scan SizeSets the shortcut button forthe [Internet Fax] tab.Security Function Broadcast Destination ON Sets whether to indicate thetransmission destinationnumber before startingbroadcast transmission.Confirm Dial OFF Sets whether to reenter thetransmission destination faxnumber before sending.
