- 59 -2. CopyAdvanced Copy SettingsThis section describes advanced settings when copying.• Making Multiple Copies on a Sheet of Paper (Repeat)• Adding a Stamp (Watermark)• Copying Both Sides of a Card to One Side (ID Card Copy)• Setting Margins (Margin)• Skipping White Pages When Copying (Omit Blank Page)This function enables you to repeatedly copy the same document on one side of a sheet ofpaper. The document can be repeated two or four times.• Two repeat• Four repeat• If [Repeat] is enabled, [Zoom] is automatically set to [Auto]. To specify a zoom rate, enable [Repeat], and then set[Zoom].• To copy a document in your preferred orientation, specify the orientation in [Direction] in advance.Changing the Document Orientation (Direction)• A part of the document may not be copied depending on the paper, document, or zoom rate.• If the repeat function is enabled, the paper tray is automatically set.1 Press [Copy] or the (COPY) button.2 Set a document in the ADF or on the document glass.Continuous Scan mode enables you to copy multiple documents at once.Enabling Continuous Scan Mode (Continuous Scan)Making Multiple Copies on a Sheet of Paper (Repeat)
