- 457 -11. Utility Software2 Select the machine to which you want to import the network scan settings from[Registered Device Table].3 Select the [User Setting] tab.4 Click [Network Scan Manager].5 Enter the administrator password, and then click [OK].The factory default password is "999999".6 Click (Import from file).7 Select the file to import, and then click [Open].8 Select the settings to import, and then click [Import].9 Click (Save to device).Deleting Network Scan Settings1 Click [Start], and then select [All Programs] > [Okidata] > [Configuration Tool] >[Configuration Tool].2 Select the machine from [Registered Device Table].3 Select the [User Setting] tab.4 Click [Network Scan Manager].5 Enter the administrator password, and then click [OK].The factory default password is "999999".6 Select the destination to delete.7 Click (Delete).8 Click [Yes] on a confirmation screen.9 Click (Save to device).• Cloning the Settings of This Machine• Cloning User SettingsCloning the Settings of This MachineYou can copy machine's settings to a different device.1 Click [Start], and then select [All Programs] > [Okidata] > [Configuration Tool] >[Configuration Tool].2 Select the machine that has the settings you want to clone from [RegisteredDevice Table].3 Select the [Device Setting] tab.4 Click [Cloning].5 Select a cloning destination, and then click [Execute].6 Enter the administrator password for the cloning source and target, and thenclick [OK].The factory default password is "999999".Cloning User SettingsYou can copy user settings to a different device.1 Click [Start], and then select [All Programs] > [Okidata] > [Configuration Tool] >[Configuration Tool].2 Select the machine that has the settings you want to clone from [RegisteredDevice Table].3 Select the [User Setting] tab.4 Click [Cloning].Cloning Settings
