- 424 -11. Utility SoftwareYou can set reception protocol (POP3, SMTP, etc.) so that the machine can receive e-mail.1 Open the Web page of this machine.Open the Web Page of This Machine2 Log in as the administrator.3 Select [Admin Setup].4 Click [Network] > [Mail Server] on the left side of the screen.5 Set the mail server based on the information on the setting information sheet ifnecessary.6 Click [Submit].7 Click [E-mail] > [Receive Settings] on the left side of the screen.8 Select [POP3] or [SMTP], and then click [To STEP2].9 Set the POP3 protocol if necessary.10 Click [Submit].Set the length of idle time before entering Power Save mode.1 Open the Web page of this machine.Open the Web Page of This Machine2 Log in as the administrator.3 Click [Admin Setup].4 Click [Management] > [Power Save].5 Select the transition time from [Power Save Time], and then click [Submit].E-mail Setup Setting Power Save Mode (Web Page)
