- 201 -5. Fax• Registering a Prefix• Using a Prefix When Sending a Fax• Using a Prefix When Registering a Speed Dial NumberYou can add a prefix to a destination number. You can also attach a prefix when registering anumber to speed dial.Registering a PrefixYou must register the prefix to [Prefix] in advance. You can enter up to 40 digits.You can use symbols, such as "#" or "*".Entering Fax Number to Send a Fax (User's Manual)1 Press [Device Settings] on the touch panel.2 Press or several times and press [Admin Setup].3 Enter the administrator name and password and press [OK].The factory default administrator name and password are "admin" and "999999"respectively.4 Press [Fax Setup].5 Press [Other Settings].6 Press or several times and press [Prefix].7 Enter a prefix.8 Press [OK].9 Press [Back] until the home screen is displayed.Using a Prefix When Sending a FaxYou can attach a prefix only when you enter a destination number by using the numerickeypad. To specify a destination by using the numeric keypad, follow the procedure below.You cannot use the speed dial after entering a prefix.Entering Fax Number to Send a Fax (User's Manual)1 Press [PreFix:N] on the destination entry screen.The prefix is displayed as "N".2 Enter a destination number.3 Press [OK].Using a Prefix When Registering a Speed Dial NumberYou can add a prefix to a speed dial number.Fax Numbers1 Press [PreFix:N] on the fax number entry screen for speed dial registration.2 Enter a fax number.Entering Fax Number to Send a Fax (User's Manual)3 Press [OK].Adding a Prefix (Prefix)
