- 334 -9. Operating Management/ Specifications• Print Position Adjust• Drum Cleaning• Hex DumpColor MenuBG Setting Black 0 Corrects variations in print results caused by temperature andhumidity conditions and differences in print density andfrequency. Change the setting if the background is dark.Yellow 0Magenta 0Cyan 0HU Setting OFF Sets the mode to remove stain generated while being left for along time.VL Cleaning - Cleans the image drum.Set this mode when vertical white lines appear on the output.Gloss Mode OFF Raises the fusing temperature and prints highly glossy images.Set to [ON] when printing highly glossy images.Item FactorydefaultsettingDescriptionTray 1 X Adjust 0 mm • X Adjust: Adjusts the position of the entire printing imageperpendicular to the direction of paper movement.Available range: ±2.00 mm (0.25 mm increments).• Y Adjust: Adjusts the position of the entire printing imageparallel to the direction of paper movement.Available range: ±2.00 mm (0.25 mm increments).• Duplex X Adjust: Adjusts the position of the image on theback side of a duplex print perpendicular to the direction ofpaper movement.Available range: ±2.00 mm (0.25 mm increments).• Duplex Y Adjust: Adjusts the position of the image on theback side of a duplex print parallel to the direction of papermovement.Available range: ±2.00 mm (0.25 mm increments).Y Adjust 0 mmDuplex X Adjust 0 mmDuplex Y Adjust 0 mmTray 2/3(Optional)X Adjust 0 mmY Adjust 0 mmDuplex X Adjust 0 mmDuplex Y Adjust 0 mmMP Tray X Adjust 0 mmY Adjust 0 mmDuplex X Adjust 0 mmDuplex Y Adjust 0 mmItem FactorydefaultsettingDescriptionDrum Cleaning OFF Sets whether to clean the drum before printing. The imagequality improvement may be expected.Item FactorydefaultsettingDescriptionItem FactorydefaultsettingDescriptionHex Dump OFF Prints out the data received from the host computer in hex. Tofinish printing, turn the machine off.Item Factory default setting DescriptionDensity Control Auto Select "Auto" or "Manual"for adjusting density.Adjust Density - Adjusting density isperformed right after thismenu is selected.Color Tuning / Print Pattern - A test page is printed forchecking the adjusting valueto be entered for any otherC/M/Y/K Tuning menus.Cyan Tuning Cyan Highlight 0 Adjust the value forHighlight / Mid-tone / Dark ofeach color within a range of-3 to +3.+ : Adjusted to be darker.- : Adjusted to be lighter.Cyan Mid-Tone 0Cyan Dark 0Magenta Tuning Magenta Highlight 0Magenta Mid-Tone 0Magenta Dark 0Yellow Tuning Yellow Highlight 0Yellow Mid-Tone 0Yellow Dark 0Black Tuning Black Highlight 0Black Mid-Tone 0Black Dark 0Density Cyan 0 Adjust the total density ofeach color within a range of-3 to +3.+ : Adjusted to be darker.- : Adjusted to be lighter.Magenta 0Yellow 0Black 0Adjust Registration Color registrationadjustment is performed.Ink Simulation Ink Simulation OFF Sets the ink simulation. Thissetting is enabled only forPS language jobs.
