- 339 -9. Operating Management/ Specifications• Wireless (Infrastructure) Setting (If wireless LAN module fitted)• Wireless(AP Mode) Setting (If wireless LAN module fitted)• Factory DefaultsMail Server SetupGigabit Network Disable Sets whether to enable access with GigabitEthernet.HUB Link Setting Auto Sets the hub linking method. Normally, select[Auto Negotiate].Item FactorydefaultsettingDescriptionWireless(Infrastructure) Disable Sets whether to enableWireless(Infrastructure).Network Setting IP Address Set Auto Sets the method of assigning an IP address.IPv4 Address 192.168.101.100Sets an IP address.This item is displayed when TCP/IP protocolis enabled.Subnet Mask 255.255.255.0 Sets a subnet mask.This item is displayed when TCP/IP protocolis enabled.GatewayAddress0.0.0.0 Sets a gateway address.This item is displayed when TCP/IP protocolis enabled.DHCPv6 Disable Specify whether to enable DHCP when usingIPv6.WPS WPS-PBC - WPS-PBC is executed.WPS-PIN - WPS-PIN is executed.WirelessNetworkSelectionA list of access point name foundin the search- Displays a list of wireless LAN access points'names that are found in a search.Manual Setup SSID (NULL) Enter an SSID.Security Disable Selects the security of the wireless LANfunction."WPA-EAP" and "WPA2-EAP" can be setonly on the Web.WEP Key (NULL) Displays if [Security] is set to [WEP].Enter the WEP key.WPAEncryptionTypeAES Select a WPA2-PSK encryption type.Displays if [WPA-PSK] or [WPA2-PSK] isselected for [Security].WPA Pre-shared Key(NULL) Enter the Pre-shared Key.Displays if [WPA-PSK] or [WPA2-PSK] isselected for [Security].Wireless reconnection - Wireless(Infrastructure) reconnection isexecuted.Item Factory default setting DescriptionItem Factory default setting DescriptionWireless(AP Mode) Disable Sets whether to enableWireless(AP Mode).Automatic connection (push-button) - Connects automatically(push button) usingWireless(AP Mode).Manual Setup SSID (Device-specific string) Displays SSID ofWireless(AP Mode).Password (8-digit number) Displays the password ofWireless(AP Mode).Connection Setting SSID (Device-specific string) Sets SSID of Wireless(APMode).Password (8-digit number) Sets the password ofWireless(AP Mode).IPv4 Address 192.168.110.100 Sets the password ofWireless(AP Mode).AP Mode User Setting Don't disclose user Sets whether to open theAP mode information toother than theadministrator.Item Factory defaultsettingDescriptionFactory Defaults - The settings of the network, mail server,LDAP server, and secure protocol server arereturned to the default settings.Item Factory default setting DescriptionSMTP Server (NULL) Sets the IP address or server name for the SMTP server.SMTP Port 25 Sets the port number for the SMTP server. Normally, usethe default setting.Available range: 1 to 65535SMTP Encryption None Selects an encryption method in the SMTPcommunication.Receive Setting Disable Sets the protocol to be used for receiving e-mails.POP3 Server (NULL) Sets the IP address or server name for the POP3 server.
