- 90 -3. ScanSaving Scanned Data to a ComputerThis section describes how to save scanned data to a computer.Use Scan To Computer function of the machine or use software of the computer to scan.To scan, use one of the following software.• Changing the Machine Settings• Using ActKey• Using WSD Scan• Using Image Capture (Mac OS X)• Using a Scanner Supported Application• Adding Destination for Scan To Computer• Deleting Destination for Scan To ComputerEnabling Network TWAINEnable the Network TWAIN function so that you can use the Scan to Computer function on acomputer that is connected via a network.1 Press [Device Settings] on the touch panel.2 Press or several times, and press [Admin Setup].3 Enter the administrator name and password and press [OK].The factory default administrator name and password are "admin" and "999999"respectively.4 Press [Scanner Setup].5 Press [TWAIN Setup].6 Make sure that [Network TWAIN] is set to [ON].Pressing [Network TWAIN] switches between [ON] and [OFF].7 Press [Back] until the home screen is displayed.Setting PC Scan modeSet the scan mode when scanning from a computer. This machine has the following threescan modes.For WindowsActKey: To be installed if you install software from [Install Optional Software].WSD: Preinstalled on Windows.For Mac OS XImage Capture: Supplied with Mac OS XChanging the Machine Settings
