Error Messages- 136 -Error Messages for CopyingThe following messages are displayed on the display screen of the operator panel while using the copyfunction.Error Messages for FaxingThe following messages are displayed on the display screen of the operator panel while using the faxfunction.400 Paper Size ErrorPlease open the scanner unit and the topcoverand check paper size.Please see Help for details.Blinks Paper of an improper size is used.Check the paper in the tray or check for Multiple-feed. Open and close the cover to performrecovery printing, and continue.347 Please install new Image Drum Unit.Please see Help for details.Blinks The Image Drum Unit is at the end of its life.Decode error occurred.Please check image data.to CloseLights up An error occurred during analysis of image dataentered from outside of the MFP.For PrintFromUSBMemory or InternetFAX/E-mailPrint/FaxToPrint (with communication datasaving), an error occurs in the TIFF or JPEG dataanalysis.409 Please open the top cover.409:Faceup Stacker ErrorBlinks Because the Face Up stacker was operated duringprinting, the printing was stopped and an errorwas output.Errorcode Message key Cause/RemedyOffline Mode Lights up The machine is off line and cannot start a copyjob.Press the <PRINT> key on the operator paneland then select [Online/Offline] on the printmenu screen.Do you wish to resume scanning? Lights up Scanning for a copy job is suspended because anerror occurred, but now the error is resolved.To restart scanning the remaining documents,set the documents in the ADF and then select[Yes].Errorcode Message key Cause/RemedyReceived invalid data.Please see Help for details.to closeLights up The machine received and deleted unauthorizedPC fax data. While the machine received the PCfax data, the connection with the computer mightbe unstable.Check the connection between the machine andthe computer.Errorcode Message key Cause/RemedyOKOK
