Basic Settings for Faxing (for MB471, MB491, ES4191 MFP only)- 41 -Setup1Connecting a Telephone LineDepending on your environment, a method toconnect a telephone line is different. Based onthe following figures, connect the line for yourenvironment.Notez Turn off the machine when you connect the telephone linewith the machine.z You can not connect to the ISDN line directly. To connect toit, use the terminal adopter (TA) and connect to the LINEconnection of the machine.z Don't connect with USB cable or LAN cable at this point.Memoz Depending on your environment of the machine, Checkingthe reception mode, refer to "Specifying Reception Mode"P. 45.z Checking the dial type settings, refer to "Settings for eachdialing type" P. 43.Connecting to the Public Line(Connecting for Fax Only)1 Plug one end of the [Telephone cable]into the [LINE connection] of yourmachine and the other end into a[Public Line (Analog)].Notez Connect telephone cable to [LINE connection] withoutfail. Never connect it to [TEL connection].Connecting to the Public Line(Connecting for Fax and Telephone)1 Plug one end of the [Telephone cable]into the [LINE connection] of yourmachine and the other end into a[Public Line (Analog)].2 Remove the [Telephone connector cover].3 Plug the external telephone's cable intothe [TEL connection] of your machine.The telephone that is connected to the machineis called external telephone.Notez The number of telephone that is able to be connected tothe machine is only one.z Don't connect the telephone to the machine in parallel. If youconnect the telephone to the machine in parallel, the followingproblem will occur and the machine will not work correctly.LINE connectionTelephone cablePublic Line(Analog)LINE connectionTelephone cablePublic Line(Analog)Telephone connectorcoverTEL connection
