Installing Your Machine- 17 -Setup1z Installing Your MachineThis section explains how to unpack your machine and how to turn it on and off.Unpacking Your MachineNotez The image drum (the green tube) is very delicate. Handleit carefully.z Do not expose the image drum to direct sunlight or verybright interior light (approximately more than 1500lux).Even under the normal interior light, do not leave it formore than 5 minutes.z Packaging and cushioning material is required at the timeof shipping the machine. Please keep it as you will need itshould you wish to transport the machine at some point inthe future.1 Remove your machine from the box andremove cushioning materials and theplastic bag from your machine.The accessories are packed within the cushioningmaterial (1).2 Lift your machine and place it where it isto be installed.Notez Do not open the scanner unit till the procedure no.9 iscompleted.3 Remove the protection tapes (2) at thetop and sides of your machine to takeout cushioning materials (3).4 Remove the protection tapes (4) to openthe MP tray.5 Remove the protection tape (5) to pullthe paper up.6 Close the MP tray.12345
