Moving Your Machine- 168 -z Moving Your MachineThis section explains how to move or transport your machine.Moving Your Machine1 Hold down the power switch for about asecond to turn on the power.Referencez "Turning Off Your Machine" (P. 20)2 Unplug all the cables.z AC cable and ground wirez Ethernet or USB cablez Telephone cable(s)3 Remove any paper from the paper trays.4 lift your machine and move it to a newlocation.Transporting Your MachineNotez The image drum (the green tube) is very delicate. Handleit carefully.z Do not expose the image drum to direct sunlight or verybright interior light (approximately more than 1500 lux).Even under the normal interior light, do not leave it formore than 5 minutes.1 Hold down the power switch for about asecond to turn on the power.Referencez "Turning Off Your Machine" (P. 20)2 Unplug all the cables.z AC cable and ground wire.z Ethernet or USB cable.z Telephone cable(s)3 Remove any paper from the paper trays.4 Open the scanner unit.5 Press the top cover open button (1) andopen the top cover.6 Close the top cover.7 Close the scanner unit.8 Remove the optional second tray unitfrom the main unit if it is installed.Remove the lock parts and lift your machine, andthen remove the second tray unit.CAUTION Possible to getburned.z The fuser unit is extremely hot. Do not touch it.1
