- 97 -Scanning44. ScanningThis chapter explains the basic operation and settings for your machine's scanning functions.z Installing Scanner Drivers (TWAIN/WIA/ICA Driver)This section explains the procedure to install the scanner driver. Before using scan function, install thescanner driver. You can install TWAIN driver and WIA (Windows only) driver at the same time. Install theTWAIN driver and ICA driver (dedicate to the Mac OS X) separately.If you want to use the network scan function, follow the installation procedure below and register theinformation of your computer and then install the scanner driver.Memoz When using the network scan function in Windows, please install the ActKey utility.Referencez Before installing the scanner driver manual, do the network settings.For details on how to do network settings, refer to"Network Connection" P. 47.Notez When using a scanner with a network connection in Windows, if the equipment IP address is changed, please change thesettings in Network Configuration. For Mac OS X, please change settings in network scanner setting tools. For details, refer toUser's Manual Advanced.Installation ProcedureMemoz When using the network scan function in Windows, pleaseinstall the Network Configuration. For Mac OS X, thenetwork scanner setting tools will be installedautomatically.For Windows1 Ensure that your machine and thecomputer are turned on and connected,and then insert the "Software DVD-ROM"into the computer.2 Click [Run setup.exe] after [AutoPlay] is displayed.If the [User Account Control] dialog boxappears, click [Yes].3 Select the language and then click[Next].4 Select the device of your machine, andthen click [Next].5 Read the license agreement and thenclick [I Agree].6 Select the proper driver under[Software], and then click the installicon.If the scanner driver has been installed, the setupmaintenance program of the scanner driver isdisplayed. Check the checkbox of [Add] and thenclick [Next] to proceed to the step 8.7 Click [Next].
