Configuring the Network Settings- 71 -Setup112 Enter the information in C-2.Notez If domain management is done, enter "C-2@domainname".z When carrying out domain management, if you cannotconnect even after entering "C-2@Domainname",delete "@Domainname".Access the machine's website again, and set theNetBIOS domain name in [Workgroup name] within[Admin Setup] > [Network Menu] > [NBT/NetBEUI].*For the domain name, please check with the networkmanager.13 Select [Enter] and then press .14 Press the to select [Password] andthen press .15 Enter the value of C-3.16 Select [Enter] and then press .17 Press the to select [File Name] andthen press .18 Enter the information in C-6.- By adding "#n" to the end of the file name, aserial number is automatically assigned to the endof the name of sent files.- By adding "#d" to the end of the file name, a dateis automatically assigned to the end of the nameof sent files.19 Select [Enter] and then press .20 Configure other items if necessary.21 Press to register the settings.The setup for Scan To Network PC is complete.Referencez For details how to use Scan To Network PC, refer to "Scanto Network PC" P. 104.Managing ProfilesTo perform the Scan To Network PC, Auto Deliveror Transmission Data Save function (for MB491/ES4191 MFP Only), a profile for each destinationmust be created. You can register up to 50profiles.Referencez Refer to "Creating a Profile for Scan To Network PC" P. 70Modifying a Profile1 Press the <SETTING> key on theoperator panel.2 Press the to select [Profile] and thenpress .3 Press the to select the profile youwant to modify and then press .4 Press the to select [Edit] and thenpress .5 Press the to select the item you wantto modify and then press .6 Modify the item.7 Select [Enter] and then press .8 If you want to modify more than oneitem, repeat steps 5 and 7.9 Press to register the settings.Deleting a Profile1 Press the <SETTING> key on theoperator panel.2 Press the to select [Profile] and thenpress .3 Press the to select the profile youwant to delete and then press .4 Press the to select [Delete] and thenpress .5 Press the or to select [Yes] on theconfirmation message and then press .OKOKOKOKOKOKOKOKOKOKOKOKOKOKOKOK
