Connecting to a Computer- 57 -Setup112 Click the [Exit] button.13 Remove "Software DVD-ROM" from thecomputer.The installation is complete. Print a test page to check that the printerdriver is successfully installed on thecomputer.1 Click [Start] > [Devices and Printers].2 Right-click the OKI MB491 icon andselect [Printer properties] (> a desiredprinter driver if you have installedmultiple drivers) from the pop-up menu.3 On the [General] tab, click [Print TestPage].Installing a Printer Driver(For Mac OS X)Notez Disable the anti-virus software before starting thisprocedure. For Mac OS X 10.5 to 10.71 Ensure that your machine and thecomputer are turned on and connected.Referencez "Connecting a USB Cable" P. 552 Insert "Software DVD-ROM" into thecomputer.3 Double-click the [OKI] icon on thedesktop.4 Double-click [Driver] folder > [PS] or[PCL] folder [Installer for MacOSX].5 Enter the administrator's password, andthen click [OK].Follow the instructions displayed on the screen tocomplete the installation.6 From the Apple menu, select [SystemPreferences].7 Click [Print & Scan] (Mac OS X 10.5 and10.6:[Print & Fax]).8 Click [+].Notez If the machine is already shown in [Printers], selectyour machine, and click on [-] to delete. After this,click [+].9 Select the name of your machine whose[Connection] is [USB], and then checkthat [OKI MB491(PS)] or [OKIMB491(PCL)] is displayed in [PrintUsing].10 Click [Add].11 Check that the name of your machine isdisplayed in [Printers] and [OKIMB491(PS)] or [OKI MB491(PCL)] isdisplayed.Notez If [OKI MB491(PS)] or [OKI MB491(PCL)] is notcorrectly displayed, click [-] to remove your machinefrom [Printers] and then redo the procedure fromsteps 8 to 10.
