Configuring Copy Settings- 74 -z Configuring Copy SettingsYou can change the copy settings to alter the output to suit your needs. Each setting can be configuredfrom the [Change Settings] menu on the copy standby screen.Perform the following procedures at step 3 of "Starting a Copy Job" P. 73 described above.Referencez The changes made in the [Change Settings] menu on the copy standby screen are temporary. You can change the defaultsettings by configuring [Admin Setup] from the <SETTING> key. For details, refer to the User's Manual Advanced.Changing the Scan Size (Scan Size)You can select the appropriate size of thedocument to be scanned.1 Press the to enter the [ChangeSettings] menu.2 Check that [Scan Size] is selected andthen press .3 Press the to select a scan size andthen press .4 Press the until the start screen is displayed.Notez If you select the scan size of less than or equal of177.8mm (7 inches) wide, and make copies from ADF,Scan Resolution is changed to High Quality automatically.Changing the Paper Tray(Paper Feed)You can select the size of the document to be copied.1 Press the to enter the [ChangeSettings] menu.2 Press the to select [Paper Feed] andthen press .3 Press the to select a tray and thenpress .4 Press the until the start screen is displayed.Memoz [Tray 2] is displayed only when the optional second trayunit is installed.z When set to [Auto], the MP tray is not selected in thedefault setting. To use the MP tray, press the <SETTING>key and select [Paper Setup] > [Select Tray] > [Copy] >[MP tray], and then select [ON] or [ON (Prior)].z When set to [Auto], the paper tray that holds paper otherthan A4, B5, A5, A6, letter, legal 13/13.5/14, or executiveis not selected. To use a different paper size, select thedesired paper tray in the [Paper Feed Tray] setting. Copying Using the MP TrayIf you have selected [MP Tray], you can copy yourdocuments onto the paper loaded on the MP tray.1 Place your document with text face up in theADF or face down on the document glass.2 Load the paper on the MP tray.3 Press .Settable Values:A4* A5 A6 B5 Letter Legal 13Legal 13.5 Legal 14 Executive*indicates the factory default.OKOKOKSettable Values:Auto* Tray 1 Tray 2 MP Tray***indicates the factory default.**Not displayed in MB461.OKMONO
