Overview of Machine- 14 -Available OptionsThe following options are available for yourmachine:z Second tray unit (tray 2)Referencez For details on how to install the options, refer to "InstallingOptions" P. 22.Installation RequirementsInstallation EnvironmentYour machine must be installed in the followingenvironment:Notez Be careful of condensation. It may cause a malfunction.z If installing your machine where the humidity of thesurrounding air is less than 30% RH, use a humidifier orantistatic mat.Temperature: 10°C~32°CHumidity: 20%~80% RH(relativehumidity)Maximum wetbulb temperature: 25°Cz Do not install near high temperature or the fire.z Please do not install in a place from which achemical reaction is started (laboratory etc.).z Do not install near the inflammable solution, suchas alcohol and thinner.z Do not install in the place which the small child'shand reaches.z Do not install in an unstable place (the shakystand, leaning place, etc.).z Do not install in a place many humidity, dusty andthe place where direct rays hit.z Do not install in the environment of briny air andcorrosive gas.z Do not install in a place with much vibration.z Do not install in a place where the ventilation holeof the machine is closed.z Do not place directly on a rug or carpet with longstrands.z Do not install in a closed room with poorventilation and circulation.z If you use the machine in a small room for a longtime, please make sure that you ventilate theroom.z Install away from strong magnetic fields andsources of noise.z Install away from monitors or TVs.z When moving the machine, hold it on both sides,and move it by slightly letting the back of it fall.WARNINGCAUTION
