6.5 Tool Operation Function of CMI6-236.5.6 Teaching by Tool Operation FunctionActivate each axis manually by the tool operation, and register the positioning addresseswhere each axis stops as the point data.PROCEDURE1. Select "Online" > "Tool Operation" from the menu bar.The "Tool operation" dialog box is displayed.2. Select "Teaching" from the tool operation dialog box.The "Tool operation - Teaching" dialog box is displayed.3. Stop at the positioning point by the JOG operation.4. Press the [Teaching] button.5. Input the table number where the desired positioning information isregistered, and click the [OK] button.The current value is registered for the amount of movement of the table numberspecified. Also, if the axis that the teaching operation is performed is aninterpolation axis, the current value is registered for the movement amount of theequivalent coordinate in the interpolation group.6. Press [Exit] button to terminate the teaching operation.
