Basic Procedure4-64.3 Setting of Used Axes4.3.1 Registration of Used AxesAxes to be used in FP7 MC Unit are allocated by CMI. The following procedure is explainedon the condition that FP7 MC Unit has been already allocated in the I/O map.PROCEDURE1. Select "Tools" > "Control Motion Integrator" from the menu bar of FPWINGR7.The "Select Slot no." dialog box is displayed.2. Select the slot number and unit of the FP7 MC Unit that the setting is made,and press the [OK] button."CMI" is activated, and the start dialog box is displayed.3. Press the [New] button.The "Axis settings" dialog box is displayed.(This is the 16-axis type. For the 32-axis and 64-axis types, see p.4-9.)
