Settings of FP7 MC Unit5-25.1 MC Common Settings5.1.1 MC Common Settings Dialog BoxIn the "MC common settings" dialog box, The EtherCAT communication cycle and theoperations when errors occur are set. The following procedure is explained on the conditionthat CMI has already started.PROCEDURE1. Select "Parameter" > "MC common settings" from the menu bar.The "MC common settings" dialog box is displayed.2. Set necessary parameters in accordance with the intended use.KEY POINTS• Although the data being edited is held until finishing CMI even when thedialog box is closed with the X mark during the editing, save parameters byexecuting "File" > "Save As" as necessary.
